RIGID PET CARRIER - is the first and only rigid carrier designed for the transport of small animals on scooters, motorcycles, bicycles and cars.
SUITABLE FOR SMALL ANIMALS - designed for the transportation of small pets up to 22 lbs, 12.2 inch. It complies with the highest safety standards and the provisions of the Italian Highway Code. POW will allow your pet to travel comfortably without distraction to the driver, and in the safest way possible.
IS EQUIPPED WITH A UNIVERSAL MOUNTING PLATE - easy mounting on scooters, motorcycles, and latest generation bikes with a few screws and nuts, with an internal safety leash that allows the pet to be able to look out, without the risk of come out from the porthole, an inner cushion and 2 straps that allow you to firmly attach to the back seat of scooters and motorcycles, with wide saddle, easy to install on the machine simply by passing the seat belt through the handle.
CLOSABLE PORTHOLE - in case of rain, the door can be closed allowing the dog to remain dry and the two air inlets allow adequate ventilation. The door has an internal closure, this allows you to use the POW also as a normal trunk where you can leave the helmet or personal belongings.

Weight: 4.7 Kg
Dimensions: 42x42x37cm
Designed for the transportation of small pets up to 10 Kg It complies with the highest safety standards and the provisions of the Italian Highway Code.
POW can also be used as a simple trunk or helmet compartment, with room for two jet helmets.
With POW, you will receive a universal mounting plate adaptable to every scooter/motorcycle/bike, for easy installation in either direction of travel.
How to assemble in the car: passing the belt inside the handle
Material: Polypropylene
Material Inserts: PA6 Polyamide
Material Porthole: Polycarbonate
Material Plate: PA6 Polyamide + 25% glass charge
Type of closure: integrated cylinder
Key number: 2

Weight: 4.7 kg

Dimensions: 42x42x37cm; Inside of the carrier is 31 cm high

Maximum transportable load: 10 kg

Volume: 35 litres

Helmet capacity: 2 jet helmets or 1 full-face helmet

Mode of assembly: In either direction of travel (motorcycle, scooter and bicycle)

Method of assembly in the car: by passing the safety belt through the handle

Material: Polypropylene

Inserts material: PA6 polyamide

Porthole material: Polycarbonate

Mounting plate material: PA6 polyamide + 25% glass fibre reinforcement

Lock type: Integral cylinder

Number of keys: 2

Which types of racks can it be mounted on? In the kit, you will receive a universal plate for mounting the Pow on any scooter or motorcycle.